Choose Blank Metal Posts for Easy DIY Installation
- Gates
- Railings
- Fencing
- Accessories
& Fitting- Sheds
& Storage- Garden Structures
- Design
& StyleDo you need to install posts to support a new gate or do you have a large expanse of metal fence panels that need an affordable means of support? Well here at Garden Gates Direct we have recently introduced a wide range of blank metal posts that will allow just that.
We really like them as they make installation far simpler and unlike our old posts these new blank designs do not have any holes pre drilled into them so if you end up with one out of level with the other this will not pose you any kind of installation problem.
Furthermore, because you only drill the holes at the required fixing point on the gate, fence or railing they look much more aesthetically pleasing (some of our older posts had a number of holes pre drilled as they could suit a variety of gate designs).
What Type of Blank Metal Posts are Available?
We basically have a post that is compatible with most of our metal gates, railings and fence panels and come in the following sizes. If you are unsure which one is right for you just ask!
Bolt Down Post Options
- 50mm x 50mm x 500mm – Flat Top
- 50mm x 50mm x 500mm – Ball Top
- 50mm x 50mm x 960mm – Flat Top
- 50mm x 50mm x 960mm – Ball Top
In Ground Post Options
- 50mm x 50mm x 1400mm – Flat Top
- 50mm x 50mm x 1400mm – Ball Top
- 50mm x 50mm x 1600mm – Flat Top
- 50mm x 50mm x 1600mm – Ball Top
- 70mm x 70mm x 1400mm – Flat Top
- 70mm x 70mm x 1400mm - Ball Top
- 50mm x 50mm x 2350mm – Flat Top
- 50mm x 50mm x 2350mm – Ball Top
Alternatively we can also still offer our pre drilled posts for customers looking for an easier installation route and can also make them in wall mounted versions of the above. To find out more about these options get in touch by phone or email.
- Railings
