Hampton Wooden Garden Gate | 1.2m High

The Hampton Wooden Garden Gate is an excellent choice for any outdoor location where an imposing design will prove beneficial for security and restricted access. Manufactured from a low maintenance smooth planed pressure treated softwood, the gate is handmade in the UK, features a 70mm thick mortise and tenon jointed framework for strength and security whilst the 3 x horizontal rails and diagonal bracing on the back face increase rigidity. For an enhanced appearance the Hampton design features a vertical clad tongue and groove boarded panel in the bottom section to add privacy whilst the open top section is fitted with metal bars. Spear shaped finials are then fitted to the top rail as a timeless finish detail.

Hampton Wooden Gate Specification

• Handmade in the UK by time served joiners with a fine attention to detail.

• Long lasting smooth planed pressure treated timber construction.

• Suitable for any residential location.

• Available to buy online in a choice of standard sizes.

• Designed to be left hand hanging (as viewed from the front face of the gate).

• 70mm x 70mm mortise and tenon jointed framework.

• 70mm x 54mm and 44mm x 44mm bracing for additional strength.

• 95mm x 14mm tongue and groove infill boards set within the framework.

• 16mm steel infill bars and spear shaped finials primed black (undercoat).

• Suitable for painting or staining.

• Hinges and accessories are sold separately.

Physical Height

• 1200mm (47")

Ordering Sizes

Select the width option you require using the drop-down menu above. Please be aware that the sizes stated are the physical width of the gate. We have made no allowance for the additional space required for the hinges, ring latch and wooden posts.

Looking for Help and Advice?

We provide lots of useful information pages within this website including our simple to understand measuring guide, a comprehensive frequently asked questions section and general installation guide. You can also send us your questions and queries using our online enquiry form and we will be on hand to provide support.

Other useful pages you may be interested in include:

• Installation Problems and Solutions

• Maintenance Aspects of Wooden Gates

• How to Install Wall Mounted Timber Posts

• How to Install In-Ground Posts

Useful Information about the Gate

Fittings: Supplied without the hinges or latch as standard. If these items are required, please add them to the order using the options and accessories menu shown above.

Posts: The gate should be installed to wooden posts which can be purchased above using the drop-down menu. Where wall mounted posts are required, these should be attached to existing masonry using appropriate fixings (not included). For installations where the posts are freestanding, they should be set to a depth of around 600mm – 900mm and supported using concrete. In either instance, to allow for expansion of the timber and to ensure sufficient space is available for the hinges and latch, the gap formed between the posts should be 20mm wider than the width of the gate you order.

Finish: The Hampton range is manufactured from pressure treated timber. This process will result in the wood having a temporary green tint to it. Over time this will weather down and start to fade once left exposed to the elements. If you are planning on painting or staining the gate, you will need to allow sufficient time for this to occur before applying any finish.

Installation: We only recommend the use of hook and band type hinges as these are designed to provide the maximum level of support. If you would like to find out more information about installation in general, please click here.