Carlton Wooden Estate Gates

The Carlton Wooden Estate Gates are ideal for any property owner looking for a cheap and affordable way to secure any residential driveway or large opening size up to 7ft in width. Featuring pressure treated tongue and groove boards set onto a ledge and braced framework, the gates have excellent levels of protection against the elements whilst remaining robust, reliable and resistant to twisting and sagging.

Carlton Double Wooden Gates Specification

• Provides a cost effective means of securing vulnerable entrances around your property.

• Handmade in the UK using pressure treated Scandinavian Redwood.

• Easy to install and requires minimal maintenance.

• Available in a choice of sizes

• 95mm x 14mm tongue and groove boards, 65mm x 28mm bracing.

• Hinges and accessories sold separately.

Physical Height

• 1800mm (71”)

Ordering Sizes

Select the option required from the menu above. The width measurement represents the combined physical width of a pair of gates. We have made no allowance for the space needed for the hinges, latch or posts.

Need Help & Advice Ordering Double Wooden Gates?

If you are confused about the size to order please read our easy to understand measuring guide or contact us for assistance. You can also find lots of guidance online if you read our ordering guide, frequently asked questions or buying guide.

You can also select from the links below for more detailed help and guidance.

• How to Install Wooden Posts (in-ground)

• How to Install Wooden Posts (wall mounted)

• Installation Problems and Solutions

• Why do Driveway Gates Prices Vary?

• Maintenance Aspects of Wooden Gates

Useful Information About the Carlton Wooden Estate Gates

Width Dimensions: This measurement is the actual width of the pair of gates when placed side by side. It does not relate to the width of each gate individually. For clarity, this means that each pair is made up of the following sizes:

• 1500mm pair = 2 x 750mm

• 1800mm pair = 2 x 900mm

• 2100mm pair = 2 x 1050mm

Height Dimensions: This dimension is measured from the underside of the gates to the highest point. You will therefore need to factor in a small amount of space for ground clearance when installing them. We normally recommend an allowance of 50mm (2”) but this will vary according to your driveway layout.

Fittings: The Carlton double wooden gates do not include the hinges, latch or drop bolt as standard. If you need to purchase these items, please choose a fitting pack from the options and accessories menu above.

Posts: We recommend the gates are installed using wooden posts. These should be of the appropriate size to provide adequate support. Wall mounted posts are an acceptable option if you are installing between existing brickwork however for freestanding installations you will need to use in ground posts (which should be set to a depth to suit ground conditions). To allow sufficient space for the hinges, the opening formed between the posts should be 40mm wider than the physical width of the gates.

Finish: The Carlton design is manufactured from low maintenance pressure treated timber. This process will result in the gates having a slight green tint which is normal. Over time this will weather down and become less visible.

Installation: For the optimum level of support, we recommend the Carlton gates to be installed using suitable size hook and band type hinges. These should be mounted to the top and bottom horizontal rails. For more details refer to our general installation guide.